Previous Article

How to Add Oil to a Murray Riding Mower

Next Article

How to Replace the Drive Belt on a Riding Mower

How to Level a Craftsman Riding Mower Deck

Lawns with hilly terrains will sometimes cause a Craftsman riding mower deck to drop out of alignment. The right side of the deck may be higher than the left side resulting in unevenly cut grass. Rocks, large sticks and other debris may sometimes slide underneath the deck loosening bolts. Routinely leveling a Craftsman riding mower deck assures safety and a well-manicured lawn.

Items Needed:


Adjustable wrench or wrench set



  • Flat surface

  • Measuring tape

  • Work gloves



  1. Place the Craftsman riding mower on level ground.

  2. Turn the mower off, and allow it to cool completely.

  3. Put work gloves on hands, and locate the deck height adjustment knob while sitting in the mower seat. The knob is black and labeled from one to six.

  4. Turn the knob to the highest cutting position, which is labeled six. Rotating the knob to the right increases the cutting height, while rotating the knob to the left decreases the cutting height.

  5. Step down from the mower, and measure the height of the deck from the ground to the bottom of the deck on both sides of the mower. There should not be more than one-fourth inch difference between either side.

  6. Locate the lift link adjustment nut below the deck and above the black rod linking it to the height adjustment knob on the lowest side.

  7. Use the proper size wrench to turn the nut to the right or clockwise to raise the deck even with the opposite side.

  8. Measure the front and back of the mowing deck in the same manner as each side. The back of the deck should be one-fourth to three-fourths higher than the front of the deck. 

  9. Locate the adjustment nut on the front of the deck where the link is attached to the rods that lower and raise the deck. Lower the deck by turning the nut to the left or counterclockwise, or turn the nut to the right or clockwise to raise the front of the deck.