Previous Article

How to Decorate a Window Box With Blinds and Curtains

Next Article

How to Measure Blinds and Curtains

How to Make Blinds and Curtains

If you would like some privacy in your house, blinds and curtains are a great thing to have. When they are open, there is a lot of light that is let in. You can close them to get the privacy that you would like to have. Blinds and curtains are extremely easy to make. 



  1. Using a tape measure, measure your windows. Add about 20 inches to the width and about ten inches to the length of the window. Cut the fabric that you have purchased to fit this measurement.




  2. If you need to sew a few pieces of fabric together to make the fabric fit the measurement of the width, do it. Turn in the edges of the fabric. Sew the curtain's length.




  3. Fold the top of the curtain so that it is about eight inches down. Fold in the edges and sew straight across. This will give the curtain a nice and clean cut and leave room for the rod that will be used to hang the curtain.




  4. Turn the bottom end of the curtain about two inches. Sew the bottom length of the curtain. 




  5. Put the curtain on a flat surface. Measure the length of the curtain. Cut about four pieces of ring tape using the measurement.




  6. Put the ring tape on the back of the curtain. Sew the tape on the curtain. 




  7. Place the dowel in the casing on the bottom of the curtain. Put about four eye hooks in the dowel.




  8. Put four eye hooks to the top of the window. 




  9. Cut four pieces of cording. Make sure that you cut them 30 inches longer than the measurement of the length of the curtains. Tie one around all of the eye hooks. Put it through the ring tape and eye hooks that are located on the window frame. 




  10. Hang up the curtain. Pull on the cording when you would like the curtain to be up. When you would like the curtain to be used as a blind, release the cord.