How to Make Homemade Concrete Dye

Concrete dye, also known as concrete stain, is a great way to make concrete floors into an attractive design element in your space. You can purchase commercial dyes or make your own using ingredients that are easily obtained a many hardware and home supply stores.
With so many people using bare concrete as part of the design for an interior floor, a deck and other applications, it should come as no surprise that concrete dye is often utilized as a way to bring that floor surface to life. The good news is that rather than spending money to buy expensive dye products, it is possible to make your own, using a few basic ingredients and a little time.

Things You Need:
- Pail or washtub
- Water
- Common table salt
- Iron or copper sulfate
- Manganese carbonate
- Acid (optional)
- Determine how much concrete dye you will need to achieve the desired hue. A basic recipe for a standard room will require roughly four cups of water and a cup of one of several different sulfates to create enough product for a couple of applications. Mix the water and basic ingredients in pail or washtub. Keep in mind that each successive application will deepen the color, so more product may be required.
- Add some manganese carbonate and table salt to the basic recipe. This will help to deepen the color of the dye, making it possible to obtain a darker hue with the very first application. This approach is common if the desire is to create a more solid dye effect on the concrete.
- Decide what color you want to go with for the concrete floor. Using iron sulfate in the basic mixture will help to achieve a rusty brown look that can be deepened with additional applications. If you want a look that is more in the blue or green family, go with copper sulfate.

- Consider adding in some muriatic acid. If the concrete was previously sealed, this will help open the pores of the concrete surface, making it easier for the dye to get into the top layer of that surface. If the concrete has not been sealed, there is no real reason to use the acid.
- Once you have the basic formula worked out, use a paintbrush to apply an even layer of the dye to the surface. Allow it to dry thoroughly, then check the color. If you want a deeper hue, apply additional layers until you have the look that is desired. Use a sealant to protect the surface and the color once the concrete looks exactly the way you have in mind.