Previous Article

How Shotcrete Concrete Works

Next Article

How to Install Shotcrete

How to Apply Shotcrete

Shotcrete is a concrete adhesive product that can be used for reinforcing structures and repairing small cracks in concrete. Shotcrete is made from a fine mix of concrete dust-like particles and water. It is ideal for applications where traditional concrete methods would be difficult to use, such as swimming pools or domes.

Supplies



  • Shotcrete mixture

  • Shotcrete applicator

  • Goggles

  • Gloves

  • Respirator



  1. Put on your safety gear to avoid breathing or exposure any of the Shotcrete dust. This is important since the Shotcrete mixture is applied with an applicator that "shoots" the concrete and particle mixture from a nozzle on a hose.

  2. Add the Shotcrete mixture to the machine and add the appropriate amount of water. Mix the contents thoroughly. 

  3. Start at the bottom of the structure where the Shotcrete is to be applied. Move the nozzle in a side-to-side motion to apply the Shotcrete. The motion used is the same as if spraying with a can of spray paint. Use steady even strokes for uniform coverage. Shotcrete must be applied in thin layers with a gradual build-up of the product.

  4. Reduce the thickness of the Shotcrete by reducing the number of passing you make over a section as you move closer to the top.

  5. Leave the first layer of Shotcrete undisturbed for a 24-hour period. This will allow it to dry.

  6. Additional layers can be added, but the previous layer must be completely dry.

  7. Apply the last layer after you have achieved the correct thickness for the base of your project. This will be a complete coverage of your entire area in which the Shotcrete was used.