How to Make Wooden Window Valances
Valances add character and dimension to a window. A wooden valance can be added to any window or even a sliding glass door. These can be used in children's rooms, kitchens or any room of your home. Making your own is easy, even if you don't have a lot of carpentry experience.
Things You Will Need
- Tape measure
- 1/2" MDF
- Circular saw
- Wood glue
- Finishing nails
- Wood molding
- Caulk
- Primer
- Paint
- Sandpaper
- L-brackets
- Screws
Directions
- Measure how long you want your valance to be. A general rule is the length of the curtain rod plus four inches. The height is personal preference for the size of your window and other woodwork in the room.
- Cut a piece of MDF to the size of your measurements with a circular saw. If you want to add any scallops or decorative edge, draw it on the board before cutting.
- Measure how big the sides of the valance will be. The height will be the same height as your valance, and the depth will depend on the window treatments you will be using. Leave enough room for your drapes to fully open and close. Cut two pieces of MDF for the sides of the valance.
- Attach the sides to the front with wood glue and nails.
- Measure and cut molding at add to the top of the valance if desired. Cut corners at a 45-degree angle for a smooth corner. Attach molding to wooden frame with nails. Fill nail holes and any gaps with caulk.
- Sand any rough edges, prime and paint. Let dry completely.
- Mount valance to wall with L-brackets and screws.