How to Measure Cellular Shades for Window Installation
When you go to purchase cellular shades, make sure to bring bring your measurements. If you find something you want, you'll be all set. You can have your windows professionally measured, but it’s easy enough to do it for yourself.
Items needed:
- Tape measure
- Paper
- Pencil
- Step stool
- Decide whether you want your cellular shades mounted on the inside or the outside of the window frame. Some windows will not have the depth for an inside mount, and since it is sometimes hard to tell before you choose your shades, it is best to measure for both possibilities.
- Measure the depth at the top of your window where the headrail will be installed. The depth required will vary depending on the shade, but if you have less than 1/2 inch you will need to go with an outside mounted shade. Shade headrails can be mounted to protrude beyond the window frame or if you have enough available depth they can be installed flush with the outside edge of the frame.
- Measure the window height inside the frame from top to bottom for inside mounting. If you do not want the cellular shade to sit on the sill, deduct ¼ of an inch from your measurement. If there is no sill, measure the height where you want the shade to reach. Measure from side to side inside the frame in three places (top, middle and bottom) and write down the smallest measurement. Do not deduct from the measurement; they will do that at the store or factory.
- Measure the window and add 1 ½ to 3 inches to both of the sides for outside mounting. Measure from where you want the headrail of your cellular shade to be placed at the top to where you would like the bottom of the shade to reach. The factory will not take deductions from your measurements.