Previous Article

How to Measure Vegetables by the Cup

Next Article

How to Measure Your Body for a Prom Dress

How to Measure Windows for Window Treatments

When choosing new window treatments, knowing the correct size to purchase is crucial. Knowing how to measure your windows is an essential skill that you will need before shopping. Luckily, measuring windows is not difficult. You will just need a tape measure, and a pencil and paper. It is a good idea to measure twice to ensure that you have the correct measurements.


  • Measure for blinds and shades from the left inside frame to the right inside frame to get the width. For the length measure from the top inside frame to the top of the window sill. Round up to the nearest one-eighth of an inch if necessary.

  • Measure for drapes from the left outside trim to the right outside trim. Add four inches to that measurement for the width. For the length measure from where you are placing your curtain rod down to the window sill. Standard lengths are 63 inches and will fall to the window sill. For floor length the standard is 84 inches and if you wish to have your drapes puddle on the floor, the standard length is 95 inches. Though the length of your windows may vary. Especially in older homes where standard window sizes were not used.

  • Make you windows look bigger by measuring the width outside the frame and hanging the hardware on the wall on either side. To do this you would measure from the left outside of the frame to the right outside the frame.

  • Measure for scarfs by adding the length of the right side of the window to the length of the left side of the window; add the width of the window to this number and that is the least number of inches the scarf can be. Usually additional inches will be added to allow for draping. To figure out how many additional inches you will need to drape the scarf, decide how many drapes you would like and how far down you want them to come and add that number in as well.