Previous Article

How to Make Window Treatments

Next Article

How to Save Money on Window Treatments

How to Measure for Window Treatments

Taking accurate measurements of your windows helps you get the best look when hanging draperies.  Before you measure, decide where you want your curtains to hang.  Curtains can be hung inside the window frame or outside of the frame.  They can stop at the window frame, floor length or somewhere in between.  

Measure your windows before you start shopping for window treatments.  If you don't know where you want the curtains to hang, measure both the inside and outside of the frame.  Also measure for different lengths because curtains can fall at to floor length or between the frame and the floor.  


Materials Needed



  • Pen or pencil

  • Paper

  • Metal or wood tape measure


How to Measure For Window Treatments



  • Measure inside or outside the frame to get the width.  If you do not know where you want your curtains hung, record both measurements.  Multiply this number by 2.5 to determine how much fabric you need for the curtains.

  • Measure the length of the window either inside or outside of the frame.  Again, measure both if you are not sure you will hang your curtains.  Curtains can hang at different lengths, so measure to 1 inch below the frame and to the floor.  

  • Carefully record each measurement as you take them.  


Tips



  • Cloth measuring tapes may not be accurate as they can sag or stretch.

  • Round each measurement to the closest 1/4 inch.

  • Mark each measurement as the height or width.  It is easy to mix the two measurements if they are not noted.

  • Measure window at the top, middle and bottom as some windows are not straight.

  • For panel curtains, you will need 2.5 times the width for both panels combined.