Previous Article

How to Install Interior Wall Lights

Next Article

How to Wire Outside Wall Lights

How to Mount Exterior Wall Lights

Exterior wall lights add depth and beauty to any home. You want to make sure they are installed directly against your wood or siding. This will prevent water from getting into your electrical box and causing damage. Using these simple steps, you will have your lights installed in a quick and safe manner.

Items Needed:



  • Exterior wall light

  • Caulk

  • Foam mounting box/block

  • Ladder (optional)

  • Hammer and/or screwdriver (optional)


Instructions



  1. Turn off the power to avoid risk of electrical shock. You will want to do this on a sunny day without any rain. This will give the caulk time to dry.

  2. Use ladder if needed. Look at the old light to see the best way to remove it. Remove the old light from your wall, and disconnect any electrical wires. 

  3. Using the foam mounting block, caulk around the sides and back of it. You will want it to rest flush against your siding, without any gaps.

  4. Press against your siding, leaving the receptacle box in the center. Leave the bottom of the mounting block un-caulked. This will allow any rainwater to escape out the bottom.

  5. Gently pull your electrical wires though the opening in the foam mounting block. Connect them to your light and attach the light to your electrical box.

  6. Once you have your light attached to the wall, you can finish caulking around the edges. 

  7. Repeat the above steps with any additional lights that you have. 

  8. Once you have all your lights installed, you can turn the power back on and enjoy the results.