Previous Article

How to Make PVC Plumbing Solvent Connections

Next Article

How to Fix Shower Plumbing

How to Repair Shower Plumbing

Shower plumbing includes the incoming freshwater and outgoing waste water pipes. The showerhead and faucet assembly will begin to leak over time at the location where the faucet is attached to the incoming freshwater pipe or at the point between the showerhead and the swivel ball.

Items Needed:



  • Screwdriver

  • Adjustable wrench

  • Cartridge

  • Cartridge puller

  • Plumbers grease

  • Small knife



  1. Identify the kind of showerhead that you have in your bathroom plumbing. You can replace the head or clean the showerhead and replace the cartridge valves.

  2. Replace the old cartridge with a new one that is identical. Cartridge valves come in different styles and sizes. It is important to identify and get the same part for the repair job. Take the old cartridge to the plumbing store to ensure you get the correct replacement part.

  3. Turn off the water supply to the shower at the main bathroom shutoff valve.

  4. Use a knife to pry off the cap on shower faucet that exposes a screw. Remove the screw and then the entire handle.

  5. Remove the stop tube to access the cartridge. Use a screwdriver to pull out the cartridge exposing the handle washer. Remove the washer and then, pull out the cartridge stem with pliers. There are different ways to pull out the cartridge and some may need a cartridge puller if the pliers do not work. Twist the cartridge before pulling it.

  6. Install the replacement cartridge for your faucet. Turn the hex screw and pull the cartridge puller. Replace it into the same position where you removed the old one and properly align the faucet before reassembling all the parts.