How to Repair an MTD Garden Tiller
An MTD garden tiller cultivates a yard where a garden can be planted or sod can be laid down. If there are issues with the garden tiller, you can do many things before taking it to a repairman. It could be problems with the motor oil, fuel, or spark plug. You can fix your MTD garden tiller yourself and it’s not hard at all. And in the process you will save money. However, you must know the proper steps to fix it.
Things you will need to repair a MTD garden tiller:
- Gas
- Air filter
- Garden hose
- Spark plug removal tool
- Spark plug
- Take a spark plug removal tool and use it to remove the spark plug wire. The tools can be purchased from a local hardware or home improvement store. You can find the spark plug wire on the side of the tiller.
- Check the spark plug for any damage or dirt on the unit. Take a dry cloth and clean the spark plug. Once the spark plug is clean, put it back in the unit.
- Attempt to restart the tiller. If you have to, replace the spark plug with a new one.
- Look at the fuel tank on the garden tiller and be sure there is enough fuel in the tiller to work. Make sure to drain the fuel tank if it hasn’t been used recently, and put fresh fuel back in it.
- Find the air filter housing on front of the fuel tank. Take off the air filter by pulling it with your hands. You can then clean the air filter by hitting with your palm.
- Take the air filter and run it through a hose to get rid of excess debris if necessary. If the air filter is clogged, the engine won’t work properly. There might be a situation where you have to remove the air filter. At this point, your MTD garden tiller should be working like new again. So if it happens to stop working again, you will know how repair it. If your friends and family members have an MTD garden tiller, you can give them tips on how to repair it. Or you can repair their tiller yourself.