How to Set Brookstone Projection Clocks
Brookstone is known for its catalog of unique gifts and gadgets, ranging from electronic devices to back massagers. One popular item is its projection clock, allowing the time to be displayed on a wall or ceiling rather than on a typical LCD screen. Setting the Brookstone projection clock is an easy task that can be completed in little time.
Items Needed:
- 3 AA Batteries
Instructions:
- Place the three batteries into the projection clock's battery compartment.
- Choose your preferred time format by pressing on the "12/24" (standard time vs. military time) button on the face of the clock.
- Choose your preferred temperature reading format by pressing on the "C/F" (Celsius vs. Fahrenheit) button on the face of the clock.
- Find the slide switch marked "Time Set/Alarm Set/Alarm On" on top of the projection clock. Set the switch to the "Time Set" position.
- Set the correct time by pressing the "HR" (hour) and "MN" (minute) buttons on the face of the clock.
- Set the switch to the "Alarm Set" position.
- Set your preferred alarm time by pressing the "HR" and "MN" buttons. Activate the alarm (if desired) by setting the switch to the "Alarm On" position.
- Turn the switch marked "Always Bright" on. This switch is located inside the cover of the battery compartment.
- Use the included AC adapter to plug the projection clock into a wall socket. This will allow you to use the "Always On" function without depleting the battery power source.
- Set the projection clock in a place that is convenient to your sleeping location. Direct the face of the clock and projector towards the wall or ceiling and adjust its position as needed.
- Focus the projected image with the focusing control switch on the side of the projector.