Previous Article

How to Compare Comcast Cable TV Channels

Next Article

About Cable TV Companies

How to Set Up Cable TV Channels

Setting up your television to accept cable channels doesn’t have to be a pain. The technology available today makes it relatively easy to set up cable at home with very few steps. All televisions are different, but the basic configuration won’t change much between brands.


 

Setting up cable TV channels is easier than it ever has been before. This is so the cable company saves money on having their workers come out to do it. Any customer can do this task themselves.


What You’ll Need:



  • HDMI Cables

  • Coaxial Cable

  • Cable Receiver Box



  1. Choose a cable provider and call them up to order service from them. Let the company know that you plan on doing the installation yourself. You can then choose a spot for the cable box to go. Make sure that it is close to your TV. Once the box gets there, unpack it and put it in the spot you have chosen.

  2. Plug the cable box cord into the closest available outlet. This will allow you to turn on the box.

  3. Get out your coaxial cable and connect one end of it to the cable outlet going into the house. The other end of the cable will need to be attached to the part of the cable box that says “Cable In”.

  4. Decide what cable output you are going to use for the cable box. A lot of the boxes that you will get anymore will have different outputs. The most common is the HDMI outputs, but there may also be a component or a composite output. Connect the cable you have chosen into the output that said “Video Out” on the cable box. The other end of the cables should go into the television in the “Video In” port.

  5. Follow the user manual on your television to finish setting up the video output.