How to Set Up a Home Internet Gateway

Before you can set up a home Internet gateway, you will need to purchase a router. The home Internet gateway is built into the router that you purchase. Your computers then get the signal from the router, such as a laptop or second PC. You can set up a home Internet gateway in a few short steps.

Supplies

• Router


• Cat-5 cable


• DSL or cable modem

1. Make sure your computer is completely turned off.


2. Purchase a router at any computer store. Many stores, besides a computer store, sell routers also. Do some research on routers to make sure that you buy the best one for you. There are many routers for you to choose from. You want to make sure your router is secure from online hackers.


3. Connect your DSL or cable modem to the router via the cat-5 cable. You can purchase this cable at the same place that you purchase the router. Plug in your modem and allow it to completely turn on. Make sure all of the lights on the front of the modem are on and solid.


4. Use another cat-5 cable to connect your router to your computer. Plug one end of the cable into the appropriate port on the back of the router. Plug the other end of the cable into the appropriate port on the back of your computer. Turn the router on and allow it to completely boot up. Turn your computer on and allow it to completely boot up.


5. Open a browser, such as Internet Explorer, and type your router’s IP address into the address bar. If you do not know what this is, look at the documentation that came with your router. It will walk you through how to set it up.