Previous Article

How to Sell Photocopiers

Next Article

Safety of Photocopiers

How to Use Photocopiers

Photocopiers vary slightly from manufacturer to manufacturer, but knowing some basics will help master the usage of the copier. Newer photocopiers may have additional features available so it may be confusing when first using the copier but experiment with the features.


 

Before using a new photocopier take a few minutes to look at the buttons and LCD screen. You can learn a large amount from just looking around before using the copier.



  1. Find the power switch of the
    copier and turn it to the “On” position if it is not already on.
    Some copies have a sleep mode to conserve power when they are not
    being used. If the power button is in the “On” position, press
    the “Copy” button to release the sleep mode.

  2. Most photocopiers need to warm up
    after being powered on so allow the copier to completely warm up.

  3. Lift the top of the copier and
    place the document face down on the glass panel. Use the guidelines
    to place the document the correct way. There are arrows directing you
    for document placement.

  4. Close the top of the copier.

  5. Locate the number of copies
    section and increase the number if additional copies are needed.

  6. Select the paper size needed for
    the copy. Normal length paper is 8 ½” by 11” and this is
    usually the default on the copier.

  7. Press the “Copy” button and
    allow the copier to complete the request.

  8. Check the copy that was produced
    by the copier to ensure the quality is what you want.