Quick Guide on How to Install Drapery Hardware
Draperies and curtain can become heavy and to make sure they do not fall it is important to use the proper hardware. There might be obstacles to putting the hardware up. Make sure that the wall is sturdy and has not been patched a lot of times. This will make the wall less stable. Install the hardware before attempting to hang your draperies.
- Set the stepladder slightly against the wall to attach the drapery hardware.
- Use a level to line up the correct measurements with a pencil, lightly draw a line; it should be approximately 4 inches from window frame.
- Secure your brackets with wall anchors. Even if you do not need anchors, it is always best to use them for added support.
- Screw holes in the wall where you placed the mark with your pencil. This is where the brackets will be placed.
- Insert the wall anchors into the hole. The anchors should fit snug.
- Put the bracket back over wall anchors. Screw each bracket into the anchor with the appropriate screwdriver. Continue installing the hardware based on the type used, for example, if you have to insert the curtain rod into the brackets, do so now.
- Hang your draperies.