Very good question! A couple things you can do with minimal costs. 1. Rip it down, as it is probably 1/4" lunan board, and behind it is actual studs. Install 1/4" sheetrock, tape, texture, prime and paint it. 2nd. option would be putting 1/4" sheetrock on top of paneling, finishing the same way, think this would be your best option. Giving a more solid look and feel, and having 1/2" walls as normal. Keep in mind you would most likely have to pull out electrical boxes for outlets and switches, but may get lucky not having to. Once sheetrock is up, the options are wide open for different textures, most common is knock-down. Good Luck!~Cal
Place a shim under top hinge. What makes a good shim is a piece of cardboard. Good Luck!
Easiest way is to put a shim behind a hinge, normally on the top ones. What makes a good shim is a piece of cardboard. Good Luck!
Depends what is wrong, if it squeaks oil it. If it is busted, get a new one, not being that terribly expensive. If you find yourself getting a new one, be sure to match finish with other ones as a door either has 2 if not 3 hinges.
I assume your speaking of paint on the walls of the bathroom. Generally speaking, most rooms that get high humidity, moisture, a high quality interior semi-gloss latex is used. Semi-gloss typically has a thicker coat, which resists moisture. Besides paint itself, one suggestion is leaving door open after bath/shower, allowing room to "Dry" back out.
Lots of good answers here. Having to agree with paint oxidation with darker colors, and paint absorbs suns rays and heat. Substrates can be 1/2 degree more than the ambient temparatures. One thing we suggested keeping paint costs down was suggesting this week to a potential customer is upgrading paint's quality and warranty to a life-time warranty on trim only, while painting the body or main portion with a mid-grade. The body of a structure is less likely to crack or peel if painted properly. Therefore, giving what usually needs most attention a better quality paint to begin with. Other key items is scraping off old peeling paint first, priming with an exterior primer, which bonds better than the paint itself. However, most life-time warranty paints have primer built right in. Appling 2 coats, wet on dry application, will last for many years to come. Good Luck!
duchess, as mentioned cheapest is not always the best, and the ol' saying, "You pay for what you get" resounds time after time especially in painting. So many know how to cut corners to the tune cutting quality at the same time. Paint in it's self has different grades like car tires, in either interior or exterior paints. Best rule of thumb for customer and painter is a turn-key price for all work, including material. Total price protects customer, knowing exactly what is expected when job is done, and paint company knows what is expected. If you hire someone by the hour, that person could "Milk" the clock, at an agreed hourly rate. Therefore, best is not always the least expensive. Good Luck from Eco Paint Specialist's Inc. 303.591.4978
Good Luck from Eco Paint Specialist's of Denver and Front Range. 303.591.4978 As mentioned pcda, & BBB, local Chamber of Commerce, local paint stores. One thing should be asked of paint co. How many people is planned to do the job, and what time frame. Payment schedule is important. We do not ask for any thing up front, showing how confident we are with our craftsmanship. References should be provided, along with insurance-liability/workerscomp.
|
1065 N Eastern Blvd, ![]()
|
|
|
3080 South Tellluride, ![]()
|
|
|
Red Canoe Promotions-Your Promotional Products Authority
22493 E. Maplewood Ln., ![]()
|
|
EcoPaint does not have any reviews. Create your own reviews.
EcoPaint hasn't asked any questions. Ask a question today.
I have ugly paneling on my walls. What can do to cover it up besides paint it?
"Very good question! A couple things you can do with minimal costs. 1. Rip it down, as it is probably 1/4" lunan board, and behind it is actual studs. Install 1/4" sheetrock, tape, texture, prime and paint it. 2nd. option would be putting 1/4" sheetrock on top of paneling, finishing the same way, think this would be your best option. Giving a more solid look and feel, and having 1/2" walls as normal. Keep in mind you would most likely have to pull out electrical boxes for outlets and switches, but may get lucky not having to. Once sheetrock is up, the options are wide open for different textures, most common is knock-down. Good Luck!~Cal"
Just changed door hinges on interior door. Now door won't stay in open position. How can I adjust?
"Place a shim under top hinge. What makes a good shim is a piece of cardboard. Good Luck!"
EcoPaint has not yet clipped any coupons, sales, or promotions. Clip your own coupons.
EcoPaint has no lists. Create your own lists.
Click here to ask questions and find answers to all of your fun-in-the-sun needs!