How Does a Floating Dock Work?
A floating dock is unlike a standard dock, which is built on pilings. In order to ensure that the dock float, it is built resting upon a platform, which is supported by foam. In order for the dock to be accessed, it is typically connected to land by using a gangway.
In order to account for the movement of the dock due to high and low tide, the gangway rests on the dock on wheels. This type of dock is used by many small boat marinas positioned on inlets, or otherwise not subjected to harsh wave activity.
- Understand the principle of buoyancy. This is the key principle behind a floating dock. The dock planks rest on foam, which is less dense that the water, which helps the entire dock to float. Or, expressed another way, if the dock weighs less than the amount of water that the dock is displacing, buoyancy is achieved.
- Understand the construction of a floating dock. As the weight of the dock is a key piece of its ability to float, most floating docks are built in sections. The sections are connected to each other using posts and cross supports. The number of sections required in a given dock is going to be determined by how far out into the water the dock needs to go. Tidal activity will be a major factor in determining this.
- Understand that though the dock is floating, it is still secured to the lake or ocean bottom. If the dock were not attached to the floor of the body of water, it would float out of position. Though the dock does not rest on pilings, posts are screwed into the ground, and the dock is then connected to those posts while remaining buoyant on the water’s surface.