Previous Article

How to Stain an Interior Concrete Floor

Next Article

How to Fix Concrete Foundations

How to Build Concrete Foundations

Concrete foundations are the basis of most of our building structures today. They must be built properly to avoid settling and cracking and it is not that hard to accomplish. However, in many construction projects, time is of a factor and shortcuts are taken. This is the cause of much of the problem with cracks at a later date. This can be avoided by using the proper process.

Things you will need:



  • Tape measure

  • Pencil and paper

  • Stakes and string

  • Hammer

  • Rake

  • 2x4 feet boards

  • Plate compactor

  • Concrete


1.      Make a drawing of what the foundation is to look like. In the drawing, specify the foundation’s width, length and height,


2.      Use the tape measure and mark out the corners using your stakes. Place the stakes on the corners and hammer them in enough to stay in position.


3.      Run the string around the outer dimensions of the stakes and outline the foundation. Keep the string close to the ground, as you will be using it to begin digging out the foundation.


4.      Dig a trench (the depth of the foundation) around that outside dimension marking the area that is going to be dug out. At this time, remove the soil in the entire area to the correct depth.


5.      Level the area inside with a rake or something similar. Now is the time to use the plate compactor and really pack the entire area well.


6.      Create a frame around the area with the 2x4 feet boards beginning with one side first and measuring across to find the other side. Use your tape measure to determine the depth in the middle.