How to Clean Rust on the Outside of a Camper Trailer
Rust on the outside of your camper trailer is unsightly and harmful to the exterior. If left untreated, rust continues to spread, eating away at the metal of the trailer. A rust spot is easiest to clean and get rid of as soon as it is noticed. Keeping rust off your camper is one of the best ways to protect your investment.
Items Needed:
- Large sponge
- Automotive cleaner
- Hose
- Spray nozzle
- Electric sander
- Sandpaper
- Clean cloths
- Rust deterrent
- Paint
- Paintbrush
- Clean the surface rust from the outside of the camper trailer. Wash the camper with a hose and spray nozzle. A pressure washer works well for this. Automotive cleaner, which can be bought at automotive parts stores, is specially formulated to get tough dirt and grime from vehicles. Use a sponge, and scrub around the rust area to get off as much rust as possible.
- Buff out the rust with an electric hand sander using coarse-grit sandpaper. A stiff wire brush can also be used if the rust spot is small. Continue sanding until all the rust is gone and the shiny metal surface is exposed.
- Wipe the area clean to get rid of any dust that accumulated during the sanding.
- Check the other side of the rust spot, behind and under the camper exterior. Look to see whether the rust has started to go through the metal. If this is the case, sand this area, too.
- Apply the rust deterrent or inhibitor to all sanded areas. Make sure to use one that is specifically labeled for outdoor use or for use on campers. Follow the instructions for specific application instructions. Allow it to dry for about 24 hours.
- Paint the area with outdoor paint or automotive paint that matches the color of your camper. Allow the paint to dry completely before use.