Previous Article

How to Buy FEMA Trailers

Next Article

How to Buy a Travel Trailer

How to Build a Travel Trailer

A travel trailer is a useful and necessary item for a variety of reasons. For example, trailers are used for hauling large pieces of machinery, transporting smaller vehicles like snowmobiles or riding lawn mowers. Unfortunately, travel trailers are not particularly affordable. You might consider building your own travel trailer. This will allow you to save on cost as well as build a trailer custom to your ideal specifications.

Items Needed:



  • Electric saw

  • 2-by-4-by-1/4 inch box steel

  • Welding tools

  • Axle kit

  • Suspension system

  • Tongue (square tubing length)

  • Trailer hitch

  • 1-inch solid round bar

  • Fenders

  • Tires

  • Two-by-eight foot oak decking planks


Instructions:



  1. Design your travel trailer. You may use either a CAD program to create a simple schematic. If you would prefer to use a standard blueprint, there is a variety available on the Internet.

  2. Choose an appropriate axle kit that will fit your needs. The main concern is choosing a kit that has the weight capacity you need as well as one that will fit the dimensions of your trailer design.

  3. Contact a local steel supplier and order the steel you need to complete your design. You may ask the steel yard to help you cut the material to your dimensions if needed.

  4. Double check to make sure your trailer axle and frame will fit together before you begin welding. Make sure your frame is uniform and flat.

  5. Mount the tires onto the axle. Make sure that the axle remains centered.

  6. Attach the frame and the axle together using C clamps.

  7. Mount the tongue to one of the crossbars in the front of the axle. Weld a latch in the center of the tongue. This will control any tilting and give the trailer a proper suspension system.

  8. Use a stick welder on a low heat setting to attach fenders created out of small rods. Reinforce it with an angle iron. The angle iron also creates a location for you to mount a license plate and lights.

  9. Use the welder to create side rails and vertical side braces out of angle iron.

  10. Use a saw to cut oak planks as per your trailer measurements for the floor. Lay the oak planks down to create the floor.

  11. Sand the trailer.

  12. Prime the trailer.

  13. Paint the trailer.