Previous Article

How to Build a Traditional Masonry Fireplace

Next Article

How to Clean Ashes From a Masonry Fireplace

How to Clean a Masonry Fireplace

Masonry fireplaces are large structures that are made from sturdy, mortar-bound bricks.  Today, the items, which have been commercially manufactured since the 17th century, serve more of an aesthetics purpose due to its unique abilities to serve as focal points.  However, a fireplace that is often used should be maintained regularly to ensure that it remains in a safe and clean condition.

Items you will need:



  • Brick or cement cleaner

  • Thick scrubbing brush

  • Bucket

  • Hot water

  • Clean towels

  • Hand broom

  • Dust pan



  1. Fill your bucket or other medium sized container up with water.  The hotter, the better.

  2. Scrub the masonry fireplace with the hot water using your thick bristled scrubbing brush.  Start with the top and slowly work your way down in sections.  

  3. Drain the bucket and refill it with more clean hot water.  Rinse off the brush and then begin scrubbing the fireplace in sections again, this time going from one side to the other.

  4. Spray brick cleaner onto the face of the fireplace, let it sit for a few minutes, and then start scrubbing and rinsing it off.

  5. Continue scrubbing the bricks until all of the cement cleaner has been removed.  Empty out the bucket again and replace it with clean water.  Scrub any remaining problem spots with the thick brush until the soot, smoke, and dirt stains have been removed.

  6. Brush out the soot and ash from the fireplace's interior and use your dustpan to transfer them to a trashcan.  Inspect the bricks on the inside and determine whether or not they need to be rinsed and scrubbed as well.