How to Close a Fireplace Damper
Fireplace dampers are used to close off chimneys and keep wind, snow, rain or debris from entering the home and fireplace through the chimney. It is very easy to close a fireplace damper. Never close a damper while the fire is still burning or the embers are hot and smoking.
- Put out any fires that may be in the fireplace. Make sure there are not hot embers. If you feel any heat or see any light coming from the fireplace, then there is still a fire present. Never close a chimney damper while there is still smoke and fire in the chimney. This could trap the carbon monoxide in the chimney and spread it through the home.
- Bend down so that you are even with the fireplace. Lean forward with your head in the fireplace and look directly up at the chimney.
- Locate the damper handle. If the chimney is to dark to see inside of, use a flashlight to help locate the damper.
- Turn the damper handle so it is in the horizontal position. The damper is heavy and will slowly fall into the closed position. Some chimney dampers may require you to push the handle in before turning it.
- Notice if there are any noises or drafts coming through the damper. Slide the handle from side to side to adjust the separate panels or piece of the damper and prevent any wind from coming through. This will help keep cold wind from entering your house through the fireplace.