How to Dye Automotive Leather

Automotive leather should be cleaned so it can last long and look good, which add value to your auto. Over time the leather can become dull but applying a dye can restore the leather and return it to its original beauty.

Materials Needed

• Newspaper


• Mask


• Cloths


• Water


• Leather proper


• Scrubbing pad


• Rubbing alcohol


• Sponge


• Leather dye


• Leather conditioner

1. Cover the floor with newspaper to protect the floor in case of accidental spills. Make sure you wear a mask because the fumes will be strong.


2. Wet a cloth and wring it until it is damp. Clean the leather with the damp cloth to remove any dirt and dust. Repeat this step until the leather is completely cleaned. Wipe the leather with a dry cloth and allow the leather to dry by air.


3. Pour leather prep onto a cloth and apply it over the leather. Use a scrubbing pad to work the prep into the leather. Remover the prep with a damp cloth.


4. Add rubbing alcohol to a cloth and wipe the leather. Use a dry cloth to go over the area. This will remove the alcohol.


5. Apply the leather dye onto a sponge. Coat the leather with the dye. Allow the dye to dry for 30 minutes. Apply a second layer of dye and allow it to dry for 30 minutes.


6. Use a hair dryer to dry the area. Polish the area with a clean cloth. Apply leather conditioner to the cloth and rub the leather to a shine. Make sure you use circular motions to apply the conditioner. Allow the leather to dry for 24 hours.