How to Install Clear Bra Car Covers
The front end of a car receives the most dirt and debris. A car bra is often used to protect the front end of the car. Many people do not like the look of a standard car bra, and therefore choose a clear car bra so that the car is protected without looking like anything is attached.
Supply List
- Mild dish detergent
- Garden hose
- Standard spray bottle
- Water
- Micro-fiber towel
- Clean the car that you are going to install the clear car cover on using a mild car washing detergent and water. In order for the installation to be invisible you need to start out with a clean and dust-free finish.
- Rinse the car using a standard hose to remove any remaining cleaner, dirt and debris from the surface of the car.
- Use a micro-fiber towel to dry the car off removing any remaining water without leaving behind any lint or dust on the surface of the car.
- Park the car into a garage where it will be shielded from dirt and dust during the installation process.
- Wet your hands so that they do not leave fingerprints on the bra during the installation process.
- Mix a solution that consists of 3 drops of mild dish detergent and the rest water in a standard household spray bottle.
- Pull back on the backing of the clear bra cover slowly while spraying down the exposed car cover with the cleaning solution that you have prepared.
- Spay down the area of the car where you are going to be installing the clear bra cover with the cleaning solution so that the area is wet.
- Place the clear bra cover onto the designated area ensuring that the area is wet enough to create a suction between the surface of the front end of the car and the clear bra cover.
- Rub down the area with a micro-fiber towel to remove any air bubbles that have formed underneath the surface of the clear car bra.