How to Install Custom Car Leather Interior
Installing custom car leather interior is a lot simpler than one might think. Installing a custom interior will allow you to use your creativity and expertise on your vehicle. There is no need to always call a professional, especially on a job like this.
Items Needed:
- Leather interior
- Screwdriver
- Pick out and design the leather interior covers of your choice. Thanks to today’s technology, you can select a design and have it made for your vehicle.
- Gather all of your tools for this project. You will need your screwdriver to remove the driver and passenger seat from the vehicle. This is necessary so you can take off the old seat covers. If you do not need to remove old seat covers, you should still remove the seats for easy access.
- Check out your car’s manual if you have any questions. You may have a difficult time taking some of the seats out of particular vehicles. Car manuals are excellent resources to help you learn how to remove your seats.
- Take your new leather seat interior and lay it out flat. Laying out your seat cover can help you determine where everything goes. You will notice the different rings that are used to hold the seat cover in place. These rings are known as hog rings and are what secure the seat cover.
- Use a set of pliers to close the hog rings and make sure they are in place. The instructions may vary by the type of leather seat cover you have purchased. However, you should make sure the leather seat cover is smoothed and all hog rings are closed.
- Complete the installation of your custom leather interior by putting the seats back in the vehicle.