Previous Article

How to Install a Fan

Next Article

How to Install a Fireplace Mantel

How to Install a Fifth Wheel Tailgate

Fifth-wheel tailgates have a hitching system that operates similar to that of an 18-wheel tractor-trailer truck. The tow vehicle's hitch is centered near a pickup truck's rear axle. A fifth wheel-trailer is more maneuverable than a standard trailer hitch arrangement.

Installing a Fifth Wheel Tailgate



1. Measure 56-inches back from the cab on a long bed or 36-inches for a short bed.



2. Measure 28-5/16 inches from the tailgate and make a mark in the center of the bed for a long bed, 26-5/16 inches for a short bed. This is where the fifth wheel rail is to be located.



3. Install the rear rail using the existing bolt in the bed if possible. If the holes are not present, drill the two holes on either side of the rail. Insert the bolts and nuts and tighten with the ½-inch drive socket and ratchet.



4. Lay the fifth wheel on the rear rail and line up the bolt holes.



5. Install the bolts to hold it in place. Install the front rail under the fifth wheel. Line up the holes and insert the bolts only at this time.



6. Install the end bolts in the front rail and tighten.



7. Install the nuts on the front and rear bolts, securing the fifth wheel and tighten securely.



8. Install the sidewinder fifth-wheel extension for short-bed trucks. It attaches right to the fifth-wheel king pin. The fifth-wheel extension is a 20-inch extension from the truck king pin to the pin box on the trailer.