How to Install a Ventless Gas Log Fireplace
You might assume that installing a ventless gas log fireplace would be difficult, but actually it is easier, as you do not need to vent it. This means you just need to have a gas line that the fireplace line can easily access.
- First, know what your purpose and
goal is of buying a ventless and the size of the room you wish to
install it in. Is it to heat the room in the winter months and for
aesthetics? It's important to install these units in the right size
room along with the placement because if you install in a poor
location, it can cause condensation. This will add humidity to your
room, which can get on the wall. - After deciding on a placement for
the fireplace, you will need to call the gas company to come to your
home to place the gas line. This is not something you want to take
on yourself because if you are not qualified, you could be putting
your family's safety at risk. - Make sure the gas company explains
the proper valve you will need to open once you have the fireplace
attached to the line. The gas line on the fireplace differs in
placement, but it can normally be moved from one side to the other. - Do not open the valve to the gas
line until it fully and tightly attached to the fireplace. If you
have it attached, properly, get a spray bottle and mix it with
liquid soap. Open the gas line valve just a tiny bit and spray the
soapy water all around the attachment. If you see it bubbling, you
know for sure you have a leak and need to shut the gas off. If no
bubbles, continue to open the value slowly, spraying each time to
make sure you do not see bubbles.