How to Light Gas in a Log Fireplace
Gas log fireplaces are usually more efficient than traditional fireplaces. In especially cold weather a gas fireplace can heat a room quickly and evenly. Knowing how to quickly and safely light these will help you create a warm fire whenever you may want one.
A gas log fireplace has the advantage of heating up quickly without wasting a lot of energy or electricity. A few simple tips will help you light these quickly every time you need it.
- Invest in a box of fireplace matches. These are longer than traditional wood matches so it makes it easier to light a fireplace or grill without burning yourself. They don't cost too much and can be found at any home improvement store.
- Use the fireplace key in the gas line and turn the gas off. You want to allow the line a little bit of time to settle. If you smell gas you should immediately stop and troubleshoot. Lighting a fireplace when the gas has been seeping from the valve can be extremely dangerous.
- Light a match and place the flame near the burner under the gas log. With the flame in place you can slowly turn the gas valve so that it starts to flow again. If your fireplace uses a pilot light do not follow this step! It can be dangerous. Light the pilot instead by following the directions from the manufacturer.
- Wait for the burner to ignite. Remove the match from the flame and blow it out. Let the gas burn for a minute or two then adjust the valve so you have the flame you desire.