How to Light a Gas Ventless Fireplace
If you have not used your ventless gas fireplace for a long period of time, it can be hard to light it or get a flame started. Once you ignite the fireplace and have established a flame, you can use the settings dial to control the heat output.
- Remove any flammable items that may be in or around the fireplace. Check the fireplace to make sure it is not damage in anyway, and check the gas lines for any leaks or damage.
- Open the gas valve. This valve allows gas to flow into the fireplace. Locate the turn dial that controls the fireplace setting. Turn the dial to the "OFF" position.
- Light a match and place it inside the fireplace near the gas valve. Locate the pilot dial, press and hold it in as you place the lit match inside the fireplace. Once the oven lights, wait for twenty seconds and then release the pilot dial. If the flame goes out press the pilot dial back in and reignite the fireplace. You may need to do this several times before it stays lit.
- Once the fire is steady, turn the pilot dial to the "On" position. Turn the knob back and forth between the low and high settings to test the flame and find the desired setting. If you want to make the flame larger to put off more heat, turn the knob to the "High" position. To make the flame smaller and cause it to put off less heat, turn the knob to the "Low" position.