Previous Article

How to Look After Sheepskin Car Covers

Next Article

Tips on Removing Odor From Your Car Detailing

How to Make Car Covers

Car covers made of soft cloth protect the vehicle from dings, nicks and scratches. They are commercially available, and car owners may make their own car covers. This type of cover has grommets, which allow you to tighten the cover over the car.

Things You'll Need:



  • Fleece blankets

  • Scissors

  • Half-inch grommets

  • Grommet press

  • Half-inch elastic trim

  • Measuring tape



  1. Cut holes for the grommets in the blanket with a pair of scissors. These will be slits in an X pattern that are one-third inch in length. Cut the holes 3 inches from the edge of the blanket on three sides and space them 1 foot apart.

  2. Place the grommets into the holes, and secure them to the blanket with a grommet press.

  3. Measure the length and width of the fleece blanket. Add these two measurements together and double this sum to obtain the perimeter of the blanket. Cut a length of elastic trim equal to the perimeter of the blanket.

  4. Thread the elastic trim in and out of the grommet holes on three sides of the blanket. Adjust the hanging ends of the trim so they have equal lengths.

  5. Repeat this procedure to make a second car cover. A typical car requires two fleece blankets to completely cover it.

  6. Place the car covers over the car and tighten the elastic trim to secure the cover in place. Use caution to ensure the grommets hang below the bumper of the car to prevent them from scratching the car.