How to Make a Concrete Hallway
Hallways are the high-traffic area in any home. With high traffic comes a need for durability. Few things are as durable, and lasting, as concrete. In recent years, concrete flooring has grown in popularity with the advent of new techniques, which can create a beautiful veneer, sometimes even looking like tiling. Transforming the drab gray of concrete to a thing of durable beauty can be well worth the investment.
What you will need:
5 gallon bucket, acid-based concrete stain, water, broom, vacuum cleaner, metal scraper, two-inch masking tape, mop, color swatches, clear concrete floor sealer, paint brushes, floor wax, baking soda, floor polisher, portable sprayer, polythene sheeting
Preparing the flooring:
- Sweep the concrete floor to make sure there is no dirt or dust remaining on the flooring before you start.
- Scrape the floor to remove any blemishes or raised areas of concrete with a metal scraper.
- Vacuum along the edge of the wall to remove any remaining dust or dirt.
- Affix strips of masking tape along the edges of the flooring, just under the wall, in a straight line.
- Tape polythene sheeting along the wall, up to four feet in height, on both sides of the hallway. Tape the sheeting at the top and bottom to keep it securely in place.
- Mop the flooring to insure that it is dust and dirt-free. After mopping it, allow it time to dry completely.
Staining the floor:
- Mix the stain with water, in a one-to-one ratio, in a five-gallon bucket. Make sure that the stain and water are mixed together completely.
- Pour the stain/water mixture into a portable sprayer, pumping the handle several times to create the pressure needed for the next step.
- Spray the entire concrete floor with the portable sprayer. Let the stain dry completely.
- Apply a second coat, then let the second coat dry and set overnight.
Finishing the flooring:
- Mix baking soda and water into a mop bucket. You should have four cups of baking soda for every gallon of water in the mixture.
- Mop the floor with the water/baking soda mixture to deactivate the active ingredients in the acid stain.
- Mop the floor with fresh water four to five times to remove any residue build-up from the baking soda.
- After the floor has dried, remove the masking tape and polythene sheeting.
- Lay down two coats of clear concrete floor sealer with a paint roller. Make sure to leave adequate drying time in between the two coats. Let the floor sealant dry overnight after the second coat.
- Buff the floor with a commercial-grade floor polisher. This will bring out the color and create a lasting shine.