How to Make a Cotton Shag Rug
One of the fastest ways in which to add a little spark and drama to a space is by adding a little rug to lighten and brighten the room. So many store bought rugs available today seem so very... ordinary. Why not ditch the dreary version and let fun and flair follow function for a change and make your own?
Items Needed:
- Old t-shirts cut into quarter-inch strips wide and 6 inches long
- New cotton fabric from fabric store cut into quarter-inch strips
- Gridded mat board
- Measuring tape
- Sharpie pen
- Scissors
- Hot glue gun with long narrow nozzle and wash-resistant glue
- Wash the fabrics. Whether you’re using an old t-shirt collection to create your shag rug, or if you’ve chosen to use new cotton t-shirt material, you’ll have to wash everything before you begin. The t-shirts can be washed together in cold water providing that you know they won’t bleed out. If you have any doubts at all, wash suspicious shirts separately in hot water. If they bleed out, wash again until water runs clear. New cotton t-shirt fabric should be washed separately and checked for color fastness. Once thoroughly cleaned, all fabrics should be dried on high heat to allow for any potential shrinkage.
- Measure your rug. Use a measuring tape to work out how large you want your rug to be. Mark the boundaries of your rug directly onto the mat with your sharpie pen and cut out your rug shape. Set aside.
- Cut your t-shirts or your t-shirt material into strips that are a quarter-inch wide and six to seven inches long, separating colors into families as you go. Use the time spent cutting and sorting fabrics to work out what you want to do with your rug. If you have a pattern in mind, draw it on the matting and fill it in as you go. You could also create a "freeform" look by working in groups of colors in abstract swirls and patterns or even chose just a simple solid color with a complementary border. Whatever you decide, know what direction you’re headed in before you begin creating your rug.
- Begin at the very edge of the border on a short side, picking up a strip of fabric and bringing it underneath the gridded mat. Take the ends of the strip and bring it up through a set of holes on the mat that are side by side. Tie the ends of the strip to the top side of the mat by forming a small, tight knot. Use your hot glue gun to place a bead of hot glue on the center of the knot, then tie the strip again, creating a knot directly on top of the hot glue. This will hold the pile of your rug firmly in place.
- Continue working in this manner until the entire surface of the gridded mat is filled from edge to edge.
- Flip your rug over and shake it to get all the strands even, then set it down on your floor. Now is the time to decide how long you want to keep your new shag rug. It might be helpful to step away from the rug to look at it from a distance for a bit before deciding. Once you have an overall length picked out, return to the rug.
- Grab your scissors and start trimming the pile of your rug. Begin at the corner of a short end and work your way across the rug going from one side to the other until you reach the short end at the opposite end of the rug. It may be helpful to step back occasionally to see how things are going and to make sure that you’re not pulling too much material away from any given point on the rug.