How to Make a Grandfather Clock's Chime Louder

Grandfather clocks are large and sit on the floor. They use internal hammers to pound chimes that produce a melody or single chime to represent the current time. If the chimes are not loud enough, the hammers can be adjusted to hit the chimes harder and more directly to make them louder.

1. Open the door on the front of the clock. Grab the pendulum that is swinging inside, and hold it. Let go of the pendulum slowly. Once it has completely stopped swinging, close the clock door.
2. Open the clock face door. In the center of the clock, you will find a small, plastic knob. Turn this knob to the left to unscrew it, and remove it from the clock face. Slide off both hands of the clock, and set them aside with the knob.
3. Use a screwdriver to remove all the screws that hold the face of the clock to the base. Gently pull the clock face free and set it aside. Place the clock face up, so you do not damage or scratch it.
4. Reach inside the clock to find the hammers. Push the hammer straight toward the chimes. The hammer should strike the center of the chime. If it does not, you will need to pull it in the direction that allows it to do so. Repeat this process with each rod to make sure they all line up with the centers of their chimes.
5. Place the face back on the clock and use the screwdriver to fasten it in place with the screws. Place both clock hands on the clock, and arrange them in the correct time position. Screw the knob back into place and close the clock face door.