How to Reset Grandfather Clocks

Grandfather clocks can add a unique look and feel to just about any room. These clocks have been around for quite some time and can be found in modern homes all over the world. There comes a time when a grandfather clock may have to be reset. By following some rather simple guidelines, you can be sure that you reset the clock properly without damaging it.

Supplies needed:

• 
  

  Clock crank

  
  

1. 
   

   Find the out which way the cover
   of the grandfather clock opens. Carefully open up the cover so that
   you have access to the clock. If the grandfather clock has chimes,
   turn the chimes off before you reset it.

   
   


2. 
   

   Move the minute hand to adjust the
   clock time. The hand should be moved clockwise. Do not move the hand
   to fast. Moving the minute had to fast can easily damage your
   grandfather clock.

   
   


3. 
   

   Use the clock crank to adjust the
   weight in the clock. You will insert the clock crank into the crank
   holes that are located in the clock face. Turn the clock crank
   clockwise. This will have to be done again with each one of the
   crank holes. Make sure that each weight is raised. When you are
   finished with the last crank hole, remove the clock crank.

   
   


4. 
   

   Turn the chimes back on. The chimes may or may not make a sound when you turn them back on.

   
   


5. 
   

   Locate the pendulum for your
   grandfather clock. Gently pull the pendulum to one side and let it
   go. This will start the movement of the clock weights. The
   grandfather clock is now reset. Close the cover to the grandfather
   clock.