How to Move Sand and Gravel Underwater
When panning for gold or searching for other minerals in a quarry, it’s important to know how to properly move sand and gravel underwater. It’s fairly simple to learn. All you’ll need to move sand and gravel underwater is some floating suction dredge, a sluice box, a couple buckets, a shovel and just a few hours of practice.
Items Needed:
- Suction dredge
- Let your suction dredge float on top of the water in the river or lake.
- Put your hose inside your jet, located right next to your dredge’s pump. Your pump should be sitting on the river or lake’s floor close to the shoreline.
- Engage your pump and air compressor on your dredge.
- Let your pump continue to run as you drag your hose around the river or lake floor. This will suck the gravel and sand up through your hose, through the dredge’s jet and up inside your sluice box.
- Float your bucket of gravel and sand where you require it to move on your floating dredge, then shovel your bucket out where you have moved it.
- Rinse your bucket out with water to remove all the gravel and sand into a new location.
- Move as much sand and gravel as you desire by repeating the technique entirely with every load. Some people want to move sand and gravel just want to level the area, clear a small space or prospect for gold. The process may be a little difficult at first, but, like everything, get easier and easier when you practice for a while. Have fun, and good luck!