How to Remove Sticky Trim in an Automotive Interior
Automotive trim inside your automobile can become old and worn over time. The trim can be removed at home by melting the glue that attaches it to the auto. Performing the task on your own will save you money rather than using a professional auto detailer.
Materials Needed
- Blower dryer
- Extension cord
- Razor blade
- Water
- Baking soda
- Bowl
- Cloths
- Place the cord of a blow dryer into an extension cord. Put the extension cord into an outlet in your garage. Make sure the auto is close the outlet for easy access.
- Point the blower dryer into one corner of the trim. Turn on the blow dryer and heat the trim. Allow the hot air to melt the glue for about 40 seconds.
- Take a razor blade and place it under the trim. Try to scrape the trim from its place. Use more heat from the blow dryer if you have a hard time removing the trim. Continue applying heat and using the razor blade until all of the sticky trim has been removed.
- Add one part water and one part baking soda into a bowl. You want to create a paste with the two ingredients. This will be used to remove the sticky glue left over after you remove the trim.
- Take a clean cloth and use it to apply the paste over the area that you removed the trim from. Use circular motions to work the paste into the glue. Wet a clean cloth with clean water and wring it out until it is damp. Use the damp cloth to wipe away the paste. Wet the cloth as many times as necessary to remove the paste.