How to Repair Canvas Convertible Tops
The canvas on convertible car tops is a very sturdy material, but once damage occurs, it can quickly lead to more damage. It’s important to tend to the repair as soon as possible. If the gash is more than 12 inches long, you may want to consider replacing it entirely. Small tears and rips can be repaired with common sewing techniques.
You need
- Thread
- Needle
- Masking tape
- Canvas glue
- Marine canvas
- Sandpaper
- Choose a thread that closely matches the color of the canvas top and a needle stout enough to penetrate the material. You may wish to buy a curved canvas needle. Start about one-third-inch from the tear and push the needle through to the other side. Make small precise stitches, pushing the needle back up through the canvas. Continue this sewing technique, keeping the needle as straight up and down as possible. Make small cross-over stitches, as these as most secure, until you have sewn the entire length of the tear.
- Measure the length and width of the sewn tear. Cut a strip of marine canvas that is only slightly larger than the tear for a more seamless appearance. Use very sharp scissors to avoid a frayed canvas edge.
- Put masking tape to the underside of the canvas tear so the adhesive doesn’t drip through. Apply a line of glue to the sewn tear and allow to dry completely.
- Remove the masking tape from the underside of the tear.
- Sew the strip of canvas over the tear.
- Add a thin layer of adhesive over the sewn edges. Allow to dry overnight, then use fine-grit sandpaper to smooth the edges of the canvas.