How to Replace Fireplace Screens
Perhaps your fireplace screen is looking a little dingy or you just simply want to replace it with something more appealing. A fireplace screen can accent a room, but before it can do that you have to know how to remove your old screen and put on the new screen. This is not a difficult process, here's a quick tutorial.
- Remove the old fireplace screen.
The screen is attached with screws and bolts on the edges of the
fireplace screen. You will see a metal rod as well. The first step
is removing the bolts and screws, then remove the rings that are
on the metal rod, which is what holds the screen in place. If you
notice any rust on the rod, use some sandpaper and remove this. It
is better to do it now while you have the screen off. You can oil
the rod to keep, which helps to stop future rusting. - Before you rush out to buy a new
fireplace screen, use a tape measure to properly measure the screen
you just removed. That way when you get to the home improvement
store, you will be able to know which screens will fit your
particular fireplace. - Look and shop for your new
fireplace screen. You can choose any you wish as long as the
measurements are the same as your old screen. Installing the screen
is fairly straightforward, attach the new screen using the screws
and bolts that come with the new screen and tighten accordingly.
Slide the screen on the metal rods and that will complete the
installation of your new screen.