How to Restore Auto Vinyl

Auto vinyl can add a unique look to the interior of the auto. It should be properly maintained so it continues to look good and last a long time. The vinyl can still become worn over time but it can be easily repaired.

Materials Needed

• Vinyl patches


• Vinyl glue


• Scissors


• Spray bottle


• Warm water


• Mild liquid dish soap


• Cloths


• Razor blade

1. Purchase matching vinyl patches and glue from your local auto supply store. The items should closely match the vinyl inside your vehicle.


2. Locate the areas that have holes or tears. Use scissors to cut the area so it is in the shape of a square. This will allow the patch to be applied much easier.


3. Remove the lid from a spray bottle. Fill the spray bottle with warm water and a few drops of mild liquid dish soap. Gently shake the bottle to mix the solution.


4. Spray around the repair area. Use a soft cloth to wipe the area. This will clean and prepare the area for the vinyl glue.


5. Pour a small amount of vinyl glue to the back of the matching vinyl patch. The patch should cover the square hole. Apply the patch over the repair area and center it. Press down on the patch for one minute to make sure the patch bonds to the area.


6. Use a soft cloth to remove any excess vinyl glue. Allow the area to dry for 24 hours. Take a razor blade and carefully trim away any excess areas of the vinyl patch.