Previous Article

How to Resurface an Asphalt Driveway

Next Article

How to Resurface Fiberglass Bathtubs

How to Resurface Concrete Counters

Countertop resurfacing can be done when updates are needed for the room. This will eliminate the need to tear out the countertops, which can be time consuming and expensive. You do not have to change the layout of the counter or the height with resurfacing. The range of colors and finishes is unlimited with resurfacing.

How to Resurface Concrete Counters


Materials Needed



  • Handheld concrete grinder

  • Putty knife

  • Concrete resurfacer

  • Concrete repair caulk

  • Caulking gun

  • Concrete mix

  • Plastic bucket

  • Metal stirrer

  • Trowel

  • Epoxy finish



  1. Go over the surface of the countertop with a handheld concrete grinder. This step will remove any loose concrete and the any sealer if there is any. The grinder will also reveal any cracks that will have to be repaired before resurfacing can be done.

  2. Use a putty knife to apply the concrete resurfacer to the holes or cracks in the countertop. If the cracks or holes are more than ½ inch wide, apply concrete repair caulk with a caulking gun. Smooth out the concrete resurfacer or concrete repair caulk with a putty knife. Allow the surface to dry according to the directions on the packages.

  3. Follow the instructions set by the manufacturer to mix the concrete. Use a plastic bucket to mix it in and blend it with a metal stirrer.

  4. Smooth the concrete mix over the countertops using a trowel. Smooth and press the concrete mix over the counter. You want to make sure it is even and level.

  5. Allow the counter to dry for one full day. Smooth the countertop with a concrete grinder.

  6. Pour epoxy finish over the countertop using care not to spill it on the floor or other areas. Spread the finish with a paintbrush. Allow the epoxy to dry. It can take anywhere from 24 hours to 3 days to dry depending on the epoxy used.