Previous Article

How to Synchronize Chime Clocks

Next Article

How to Wind Chime Clocks Correctly

How to Use Old Chime Clocks

A lot of old clocks, especially grandfather clocks, had the common feature of chimes. Depending on the clock and its chime sequence, they usually had a set of 4 or 8 bells or gongs. The majority of old chime clocks chimed on the hour, while there were others that chimed on the half hour or even some every quarter hour.


  1. Look on the dial of the clock and search for the chime selection lever. There are some clock dials that give you the option to "chime silent" and others that allow for you to select from different melodies.

  2. Move the selection lever to select the chime melody of your choice. Make sure not to move the lever when the clock hands are within five minutes before any of the chiming positions. For example, if there are quarter chimes for the old chime clock, the chime cannot be set when the hands are between 11:40 and 11:45 because at 11:45 the chimes will go off.

  3. Listen to how the clock plays the chime melody in order to synchronize the time and the chimes. At each quarter hour the chime melody will be different. For example, the Westminster chime plays 4 notes every quarter hour, which will be 8 at the half, 12 at three quarters, and 16 chimes on the hour.

  4. Correct the sequence chime if it is incorrectly, by moving the clock's minute hand backwards 15 minutes. Next, move the minuet hand forward on the clock face, until it passes the next quarter hour, and then the clock will chime.

  5. Listen to the clock's chime to check to see if it is corrected. It is still not correct, continue to move the minute hand backwards and then forwards 15 minutes unit you hear the chime play in the correct sequence.