How to Use a Gas Log Fireplace
A gas log fireplace is very convenient because you can turn it off or on in a few seconds. You do not have to use wood with this type of fireplace, which means it does not produce any smoke. Operating a gas log fireplace is very simple, and only takes a few minutes to learn.
- Check to see if your gas log fireplace needs to be vented, as all models are made differently. You should see a sticker or some kind of tag on the front of it telling you that it needs to be vented. If you see this sticker, open the damper on the fireplace. If you do not, you should install a carbon monoxide detector in the same room as the gas log fireplace.
- Open the doors on the gas log fireplace. Make sure no flammable objects are close to the log fireplace while it is in operation.
- Look for the controls on the gas log fireplace. Some gas log fireplaces have controls directly on the fireplace, others use a remote control, and some are controlled by a wall switch. Look for the dial on the fireplace. You can turn this up or down to increase or decrease the fire.
- Find the Ignite control. Turn the dial to "Ignite," and then push the button. You should see a flame appear in the fireplace. Turn the dial control up or down, to increase or decrease the flame.
- Light the gas fireplace manually if you cannot light it electronically. Find a small tube placed inside the gas log. With the control set to Ignite, light a match to light the log.