Previous Article

How to Use a Nissan Versa MP3 Player

Next Article

How to Change a Brake Light on a Nissan Versa

How to Change Nissan Versa Taillight Bulbs

Taillights are a necessity to any vehicle to ensure the safety of yourself and others. When taillights go out and you do not get them replaced, this can lead to accidents that could have easily been prevented. Changing taillight bulbs only requires a few minutes of your time and you can complete this task without the help of a professional.


 

Things You Will Need: 



  • Screwdriver

  • Cloth



  1. Open the truck of your Versa so that you are able to access the back end of the taillight. You may also need to gently pull back the carpeting to fully access this part, but make sure that you do not cause any damage to the area.

  2. Use a screwdriver to unscrew the cover on the taillight so that you are able to directly access the light bulb that needs to be replaced.

  3. Clean the interior of the taillight lens while you have it off, so that you can get a brighter light when you drive. In order to do this, simply wipe the interior clean with a clean cloth. There is no need to purchase any sort of special cleaner. If you need to add water to the interior, dampen the cloth and wipe again to ensure that all dirt and dust has been removed.

  4. Take out the existing bulb by unscrewing it from the socket and gently pulling it out of the socket. Be careful not to have too tight of a grip on the bulb itself. If too much pressure is applied, the actual bulb can burst and create a bigger mess for you to clean up.

  5. Screw in the replacement bulb and replace the lens cover of the taillight. Replace everything in the condition it was in before and tighten up all screws to ensure they are secured.

  6. Step on the brake and have someone tell you whether the bulb is in proper working condition or if the bulb is defective.