How to Restart a Nissan Versa After a Battery Change
It is startling to have the vehicle you trust suddenly not respond when you attempt to turn it on. If your problem is related to the battery and you had to either remove or replace the battery, your Nissan Versa may need some extra care when you restart it.
- Double check the battery connections to ensure that the battery is connected properly.
- Close the car's hood.
- Insert the key into the Versa's ignition.
- Turn the key as you normally would to start the engine.
- Press the gas pedal three or four times as you turn the key. If the engine does not start immediately, turn the key to the "Off" position and wait one to two minutes before trying again.
- Turn the key again to start the engine while pressing the gas pedal three or four times. If the car still does not start, open the hood and check the battery connections again. If necessary, use a battery tester to check that the battery is fully charged and ready to use in your vehicle.
- Leave the engine running once you get it started. Modern cars use an alternator with a battery to cycle power generated by the car's alternator to peripheral devices in the vehicle and to the battery to keep it charged adequately. If your battery had to be recharged from a dead state, you may want to run the engine longer than half an hour to ensure that the alternator is cycling power back to the battery properly.