How to Change a Brake Light on a Nissan Versa
Changing brake lights on a Nissan Versa is really easy. Most people don't realize the light is just a small bulb. The only hard part will be finding where to pop out the lights housing. Replacement bulbs are very cheap; don't waste your money paying someone to replace them.
Things You'll Need:
- Owners Manual
- Socket
- Ratchet
- Screwdriver
- Towel
- Bulb
- Park your Nissan in a well lit area. You'll be working inside the trunk so ample lighting is important. Park your Nissan in a parking lot or driveway if you don't have a well lit garage.
- Pop open the trunk and look at the area where the brake lights are located. Refer to your Versa's owner's manual if you don't know where the button is to pop open the trunk.
- Pull back the carpet a little until you notice the back of the brake lights.
- Remove the back cover. Most Nissan Versa's will have wing nuts you can just unscrew by hand. Have a socket, ratchet and screwdriver nearby just in case there aren't wing nuts.
- Unscrew the bulb by twisting it with your hand. You might need to wrap your hand in a towel because the bulb could be hot. Don't use a lot of force or squeeze the bulb really hard because it could easily break. It might take a little time to loosen the bulb.
- Install the new bulb. Make sure you purchase the right kind of bulb for a Nissan Versa. Talk with an auto care store representative about the right type of bulb.
- Install the back cover and put the carpet in the right spot.
- Close your trunk to finish the project.