Previous Article

How to Change a Nissan Sentra Clutch

Next Article

How to Change the Thermostat in a Nissan Sentra

How to Change the Oil in a Nissan Sentra

An oil change is a regular maintenance requirement for any vehicle. Changing the oil in a Nissan Sentra is easy to do at home if the car owner has the right tools. The owner will need to get under the car, so it is important to have the proper support for the vehicle in order to prevent an injury from occurring.


  1. Buy the tools that you need in order to change your Nissan Sentra oil at home. A pair of jack stands is necessary, since you need to raise the vehicle off of the ground to get underneath and drain out the old oil. Besides a new container of oil, you also need a drop cloth or some old cardboard, a wrench and an oil pan for catching the old oil.

  2. Park the Sentra on a level surface once you buy the tools you need for the oil change. Turn off the engine and put the car in park. Let the engine sit for an hour so it is cool once you start to change the oil. Put a drop cloth or some pieces of cardboard under the Sentra in case any oil spills out from the drip pan.

  3. Take the car jack out from the trunk and lift the front end of the Nissan. Place the car on the jack stands and make sure the vehicle is stable. Pop the hood open, then remove the oil cap. Take the drip pan and a wrench and slide underneath the car.

  4. Center the drip pan under the oil drain. Undo the oil drainage plug using the wrench, then let the old oil drain into the drip pan. Once all of the oil drains out, tighten the drainage plug and climb out from underneath the car.

  5. Pour in the correct amount of new oil. Put the oil cap on and then close the hood. Jack up the Nissan so you can slide the jack stands out of the way, then lower the car down to the ground. Put away the jack and dispose of the cardboard if it has oil on it.