How to Change a Nissan Sentra Clutch
The Nissan Sentra is a compact car that has been in production since 1982. Automatic and manual transmissions both require a clutch to change gears. The procedure for replacing a clutch is the same for all versions of the Nissan Sentra made since 1999.
- Socket wrench
- Clutch disc centering tool
- Chassis lubrication
- Torque wrench
- Remove the transmission and transaxle assembly.
- Place a clutch disc centering tool into the hub of the clutch disc to hold the clutch in place.
- Loosen each mounting bolt on the pressure plate a little bit at a time in a crisscross pattern to remove the plate from the transmission. Gradual loosening of the mounting bolts will keep the plate from distorting due to uneven pressure.
- Remove the clutch assembly from the transmission. Disconnect the throw-out bearing from the clutch lever.
- Apply a thin layer of chassis lubrication to the spleens, input shaft and pilot bearing of the new clutch assembly. Install the the new clutch assembly
- Hold the clutch in place with the clutch disc centering tool. Mount the pressure plate to the transmission. Fasten the mounting bolts on the pressure plate bolts in a crisscross pattern. Tighten the bolts in several passes with a torque wrench to achieve a final torque of 16 to 22 ft. lbs.
- Install new throw-out bearings into the clutch release lever. Withdraw the clutch disc centering tool from the clutch disc.
- Install the transaxle and transmission assembly, ensuring that clutch disc remains centered. Check the mating surfaces of the transaxle to ensure they are flush with each other. Repeat the installation of the transaxle and transmission if the mating surfaces do not meet.