How to Change the Nissan Maxima Ignition Switch
The Nissan Maxima has been in production since 1976 and is currently in its seventh generation as of 2011. All of the engines in these models have used a distributorless ignition system since the 2000 model year. This feature greatly simplifies the procedure for replacing the ignition switch.
- Socket wrench
- Disconnect the battery cable from the battery's negative terminal with a socket wrench. This will prevent electrical current from flowing into the ignition switch while you are replacing it.
- Remove the cover from the engine if your vehicle is so equipped by using a socket wrench.
- Remove the mounting bolts for the air cleaner with a socket wrench and disconnect the air cleaner from the engine. Detach the hoses from the air intake and push them aside so you can access the ignition system.
- Disconnect electrical wiring harness from the ignition switches and push it aside. Remove the mounting bolts for the wiring harness bracket with a socket wrench and disconect the bracket.
- Remove the mounting bolts for the ignition switches with a socket wrench. Remove all six ignition switches from the vehicle.
- Install the new ignition coils and fasten their mounting bolts into place with a socket wrench. Replace the bracket for the eletrical wiring harness of the ignition coils. Connect the electrical wiring harness.
- Connect the hoses for the air intake and install the air cleaner. Fasten the mounting bolts for the air cleaner with a socket wrench. Replace the engine cover and connect the cable to the battery's negative terminal with a socket wrench.