Previous Article

How to Design a Stamped Concrete Patio

Next Article

How to Lay Stamped Concrete

How to Install Stamped Concrete

In the last few years, the concrete industry has suddenly become more creative with designs and colors. Instead of receiving a traditional slab of concrete, individuals can now have colorful, stylish designs on their driveways and patios. The installation of stamped concrete is a simple and interesting activity.

Things You’ll Need:



  • Concrete mix stamp

  • Trowel coloring agent

  • Release agent

  • Wheelbarrow or concrete mixer stamper

  • Steel or wooden stakes

  • String


 



  1. Plan your design and color. This can be done by simply taking pictures of the area or drawing onto blueprint paper. You will need coloring agent and aggregate which can be found at your local hardware store.

  2. Prepare the area where the stamped concrete will be. Clear out any debris before you set up the concrete forms. For each corner of the area, hammer in a steel or wooden take directly outside of that corner. Place string between the stakes and make sure the string the tight. Every 2 feet will require a steel or wooden take. Rebar is a good foundation within your concrete and prevents from cracking.

  3. Mix the concrete according to the directions on the packaging. Add in your coloring agent and do this with a large wheelbarrow or concrete mixer.

  4. Pour the concrete into the area where the stamped concrete will be. Level the concrete with a long piece of board or with a concrete scraper. This process can stay some time to evenly space out the concrete.

  5. Dust the damp concrete with release agent. This will prevent your concrete sticking to the stamp.

  6. Position the stamp in the center of the area, making sure it is square within the entire area. Apply pressure by standing on it. Repeat this process until the whole area has been stamped.

  7. Seal the stamped concrete once it is completely dry. The stamped concrete will need to be sealed every 18 months.